Sierra Leone Approval Regulations | 360 Compliance

The National Telecommunications Commission (NATCOM) of Sierra Leone published the final draft of electronic communications equipment (ECE) type approval regulations 2019.

The regulations are applicable to:

licensed telecommunications operators who import ECE devices used in communications networks,trading companies or individuals who import ECE devices for sale and distribution purposes and any foreign parties such as manufacturers or agents to sell ECE devices in Sierra Leone.

According to the regulations, any ECE should be either type approved or exempted from type approval by the NATCOM.

Once the device is type approved, the same model of the device does not require to be applied for the type approval procedure. All the registered models could be found in the Type Approval Register that will be kept by the NATCOM. Thus, if the model is indicated in the register, it can be imported by any eligible dealers without type approval procedure reapplication.

However, not all equipment will be allowed to sell or import on the territory of Sierra Leone. The list you can find below:

1. Radio Frequency Spectrum Scanning Receivers

2. Military Communication Equipment

3. Telephone Voice Changing Equipment

4. Automatic Call Diverters

5. Radio-communication Equipment operating in GSM frequency bands except Cellular Mobile Phones or such other equipment approved by the Commission (e.g., SIM Box Detectors)

6. Radio-communication Jamming Devices operating in any frequency band

7. Analogue TV Transmitters (starting from 2021)

8. TV sets with Analogue Tuners only (starting from 2021)

There are two ways to get the type approval certificate:Type Acceptance procedure and type Approval procedure

In the first case, previous regulatory approval is required.The equipment should already have suitable evidence from either a National Regulatory Body or Conformity Assessment Body that is recognised by the NATCOM and should comply with the relevant standards.

The NATCOM recognizes only standards of the following standardization/type approval bodies:

Sierra Leone Standards Bureau (SLSB)
Federal Communications Commission (FCC)
International Organization for Standardization (ISO)
European Telecommunications Standards Institute (ETSI)
Institute of Electrical and Electronics Engineering (IEEE)
Telecommunications Industry Associations (TIA)
American National Standards Institute (ANSI)
Internet Engineering Task Force (IETF)
Industry Canada (IC)
Infocomm Development Authority of Singapore

360Compliance provides Testing & Certification for type approval services and global market access in 195 countries. With proven expertise in worldwide regulations, 360Compliance can help your company shorten time to any market, minimize risks and manage the regulatory process from A-Z.

Contact us at contact@dev.lm-studio.co.il/360

Share this:

You may also be interested

Cambodia-TRC

Cambodia TRC Regulatory Updates

On December 11th, 2023, the head leader of Cambodia's Telecommunication Regulator of Cambodia (TRC) issued a notification to all officers regarding the review of type approval documents, emphasizing the importance of consistency between the information provided in test reports and that submitted by clients. This notification clarified that previously accepted practices, such as using the product name and country of origin as claimed by the client, should now align precisely with the details presented in the test report. Following discussions and confirmations, TRC officers reaffirmed on December 27th, 2023, that this new rule must be adhered to for all future projects seeking type approval. For submissions with one country of origin, the test report must indicate the CoO. In cases where a product has more than one country of origin, the report should display one CoO, with any additional CoOs declared in a separate declaration letter. Moreover, TRC explicitly stated that reports lacking any indication of country of origin will not be accepted under these new guidelines. This adjustment aims to enhance accuracy and consistency in reviewing type approval submissions. Streamlining TRC Type Approval with Support from 360Compliance 360Compliance specializes in navigating TRC's type approval process, ensuring documents precisely reflect the country of origin per the latest guidelines. Our team offers expert advice and comprehensive services, including preparing test reports and submitting declaration letters. Partner with us to meet TRC's stringent criteria, minimize delays, and effectively secure type approval for your products. Let 360Compliance handle the complexities of compliance, allowing you to focus on your core business activities with peace of mind. Contact us today to learn more about our services and how we can help you achieve regulatory compliance in Cambodia.

SIRIM_MCMC_Certification

Malaysia SIRIM-MCMC Regulatory Updates

The Malaysia SIRIM CMCS Department, responsible for MCMC certification, recently implemented a significant update regarding Intellectual Property (IP) Forms for Type Approval applications. These forms replace the trademark authorization letter to improve efficiency and accuracy in approvals. The new IP Forms categorize trademark declarations based on whether the applicant has obtained authorization from the trademark/brand owner. For applicants who have been authorized, the required documents include evidence of a registration certificate issued by the Intellectual Property Corporation of Malaysia (MyIPO). Or an equivalent foreign organization, along with an Intellectual Property (IP) Authorization Letter (eTAC/FOR/01-8). On the other hand, if the applicant has not obtained written consent and authorization to use the trademark/brand, they must submit the Intellectual Property (IP) Undertaking form issued by the applicant (eTAC/FOR/01-9). Importantly, these new forms are effective immediately and will be used for all new projects. They mark a significant shift in SIRIM's approach. The organization can now accept brands/trademarks that have not been officially authorized by the brand owner. However, in such cases, the importer must provide a written declaration accepting responsibility. Furthermore, the new Brand name authorization process requires both the Brand owner and the Importer to co-sign the Brand name authorization letter. This updated procedure aims to enhance transparency and accountability in the approval process for Type Approval applications, ultimately benefiting both applicants and consumers in Malaysia. Simplifying SIRIM Certification with 360Compliance Navigating the latest SIRIM and MCMC certification requirements can be complex, especially when introducing new Intellectual Property (IP) Forms. 360Compliance is here to simplify this process for you. Our team knows the latest SIRIM updates, including the new eTAC/FOR/01-8 and eTAC/FOR/01-9 forms. We provide comprehensive support, ensuring your Type Approval applications are complete, accurate, and compliant with the latest regulations. From obtaining the necessary authorizations to submitting the correct IP Forms, we manage every step of the process efficiently. Partner with 360Compliance to streamline your SIRIM certification journey, minimize delays, and maximize compliance. Contact us today to ensure your products easily meet Malaysia's certification standards.

india

India Regulatory Updates

India TEC issued a notification in January 2024 regarding generic exemptions for products without available test labs. In January 2024, India's Telecommunications Engineering Centre (TEC) issued a significant notification regarding generic exemptions due to the absence of available test laboratories within the country. These exemptions represent a crucial development, indicating that specific parameters no longer require the submission of test reports if customers cannot provide them. It's important to note that while these exemptions are in place, ILAC reports for CE/FCC are still subject to regulations based on the specific product category. This means that evaluation criteria for these reports vary depending on the nature of the product. Furthermore, TEC has specified product categories that continue to accept ILAC reports. Notably, the validation for these exemptions has been extended until June 30, 2024, with the potential for further extensions based on the evolving circumstances. These updates underscore TEC's commitment to adapting regulations to facilitate market access while maintaining stringent quality standards in the telecommunications sector. TEC approves testing exemptions for several product categories under their mandatory testing and certification program The Telecommunications Engineering Centre (TEC), under the Ministry of Communications, recently issued a notification regarding the approval of test requirements exemptions for certain product categories that necessitate mandatory testing and certification. This development signifies a significant step towards streamlining regulatory processes and promoting efficiency in the telecommunications sector. By exempting certain products from rigorous testing requirements, TEC aims to facilitate faster market access for manufacturers while maintaining high standards of quality and safety. This initiative aims to reduce costs and accelerate the introduction of innovative products to benefit industry stakeholders and consumers. How 360Compliance Can Streamline TEC Certification? 360Compliance offers expert guidance for navigating TEC certification complexities, especially with recent updates. We're adept in TEC requirements and ILAC report evaluations, ensuring compliance. Our understanding of exemption criteria and certification process management aids manufacturers and distributors in adjusting smoothly. Partnering with us secures strategic advantages for quicker market access, keeping with India's telecom quality standards. We simplify compliance, focusing on your innovation and growth in a changing regulatory landscape.

Get in touch to take the next step with 360Compliance