Regulatory Testing from Start to Certificate

    Welcome to 360 Compliance
    360

    CE – Radio Equipment Directive Updates – FAQ

    FAQs – Radio Equipment Directive (RE-D)

    Q- What is the objective of the RE-D?

    The Radio Equipment Directive (2014/53/EU) was adopted in 2014 and Member States had to transpose it into their national law before 13 June 2016. It revises the Directive on Radio and Telecommunication Terminal Equipment (1999/5/EC) and sets down requirements on safety, health protection and electromagnetic compatibility. It also ensures the efficient use of radio spectrum and provides the basis for further regulation governing some additional aspects (e.g. access to emergency services, interoperability, safeguards to ensure the protection of privacy and personal data). The Directive applies to radio equipment, such as domestic television and radio sets, mobile phones as well as Wi-Fi, Bluetooth and GPS or other satellite transceivers. The aim is to provide an open market for telecoms products and allow equipment which has been approved for use in one EEA country to be made available in any other.

    Q-Which equipment falls within the scope of RE-D?

    • Televisions and radio receivers, which were not covered by the R&TTED, now fall within the scope of the RE-D. Equipment operating below 9 kHz also now falls within the scope.
    •  Radio-determination equipment is now clearly included in the RED.
    • Any other radio equipment which was under the R&TTED, with the exception of fixed line terminal equipment and custom built evaluation kits, falls under the RED.

    Q-Will the EU withdraw radio equipment from the market because of the change of legislation from R&TTE to RED?

    The EU does not withdraw products from the market. The Member States are in charge of market surveillance. In any case, once equipment is placed on the EU market, it can remain on the market even if the legislation changes in the meantime. This is a general rule of the Internal Market and full guidance is given in the ‘Blue Guide’. Independently from the availability of or the compliance with standards, the National Market Surveillance Authorities can always withdraw products from the market for justified reasons (e.g. they pose a risk to the safety of the users or the consumers). The rules on withdrawal of equipment in case of risks are specified in the RE-D. National Market Surveillance Authorities, not the Commission, are responsible for enforcing these rules.

    Q-What are harmonised standards for?

    The application of harmonised standards is voluntary. They are used to demonstrate that products, services, or processes comply with relevant requirements of the EU legislation. However, manufacturers can use any technical specification to demonstrate that the radio equipment complies with all necessary requirements, upon their own responsibility. The essential performance requirements and use of radio spectrum laid down in Articles 3.2 and 3.3 must, however, be certified by a Notified Body, if alternative specifications are applied. The list of notified bodies can be found on the Commission website. The manufacturer can give assurance that the equipment meets the safety and health and electromagnetic compatibility requirements laid down in Article 3.1 by showing conformance to harmonised standards, but there is always the option to use alternative technical specifications. In such a case, the manufacturer assumes the risk if a product subsequently presents a risk to anybody.

    Q-Can manufacturers apply draft standards or other specifications that have not been published as harmonised standards?

    Under the RE-D, it is allowed. It is important that the manufacturer demonstrates in the technical documentation that the radio equipment is compliant with EU legislation/the RE-D. In this case, the manufacturer must follow a conformity assessment procedure which involves a notified body as explained above.

    Q-Who develops harmonised standards?

    The European Standardisation Organisations (ESOs) develop harmonised standards on the basis of a request from the Commission. The ESOs are the European Committee for Standardisation (CEN), the European Committee for Electro-technical Standardisation (CENELEC) and European Telecommunications Institute (ETSI). The standardisation organisations are private bodies, composed of industry experts and other stakeholders, and are fully independent from the Commission.

    Q-Can manufacturers use harmonised standards of the R&TTE to demonstrate compliance with the RED?

    Not in all cases. Harmonised standards of the old R&TTE Directive may not fully address the essential requirements of the new RE-D. The references of the old harmonised standards of the R&TTE that fully address the essential requirements of the RE-D have already been published under the RE-D list.

     

    Contact 360Compliance Experts for more Information on RED requirements

     Source: European Commission 

     

     

    Share this:

    You may also be interested

    Cambodia-TRC
    Cambodia TRC Regulatory Updates
    March 21, 2024
    On December 11th, 2023, the head leader of Cambodia's Telecommunication Regulator of Cambodia (TRC) issued a notification to all officers regarding the review of type approval documents, emphasizing the importance of consistency between the information provided in test reports and that submitted by clients. This notification clarified that previously accepted practices, such as using the product name and country of origin as claimed by the client, should now align precisely with the details presented in the test report. Following discussions and confirmations, TRC officers reaffirmed on December 27th, 2023, that this new rule must be adhered to for all future projects seeking type approval. For submissions with one country of origin, the test report must indicate the CoO. In cases where a product has more than one country of origin, the report should display one CoO, with any additional CoOs declared in a separate declaration letter. Moreover, TRC explicitly stated that reports lacking any indication of country of origin will not be accepted under these new guidelines. This adjustment aims to enhance accuracy and consistency in reviewing type approval submissions. Streamlining TRC Type Approval with Support from 360Compliance 360Compliance specializes in navigating TRC's type approval process, ensuring documents precisely reflect the country of origin per the latest guidelines. Our team offers expert advice and comprehensive services, including preparing test reports and submitting declaration letters. Partner with us to meet TRC's stringent criteria, minimize delays, and effectively secure type approval for your products. Let 360Compliance handle the complexities of compliance, allowing you to focus on your core business activities with peace of mind. Contact us today to learn more about our services and how we can help you achieve regulatory compliance in Cambodia.
    SIRIM_MCMC_Certification
    Malaysia SIRIM-MCMC Regulatory Updates
    March 21, 2024
    The Malaysia SIRIM CMCS Department, responsible for MCMC certification, recently implemented a significant update regarding Intellectual Property (IP) Forms for Type Approval applications. These forms replace the trademark authorization letter to improve efficiency and accuracy in approvals. The new IP Forms categorize trademark declarations based on whether the applicant has obtained authorization from the trademark/brand owner. For applicants who have been authorized, the required documents include evidence of a registration certificate issued by the Intellectual Property Corporation of Malaysia (MyIPO). Or an equivalent foreign organization, along with an Intellectual Property (IP) Authorization Letter (eTAC/FOR/01-8). On the other hand, if the applicant has not obtained written consent and authorization to use the trademark/brand, they must submit the Intellectual Property (IP) Undertaking form issued by the applicant (eTAC/FOR/01-9). Importantly, these new forms are effective immediately and will be used for all new projects. They mark a significant shift in SIRIM's approach. The organization can now accept brands/trademarks that have not been officially authorized by the brand owner. However, in such cases, the importer must provide a written declaration accepting responsibility. Furthermore, the new Brand name authorization process requires both the Brand owner and the Importer to co-sign the Brand name authorization letter. This updated procedure aims to enhance transparency and accountability in the approval process for Type Approval applications, ultimately benefiting both applicants and consumers in Malaysia. Simplifying SIRIM Certification with 360Compliance Navigating the latest SIRIM and MCMC certification requirements can be complex, especially when introducing new Intellectual Property (IP) Forms. 360Compliance is here to simplify this process for you. Our team knows the latest SIRIM updates, including the new eTAC/FOR/01-8 and eTAC/FOR/01-9 forms. We provide comprehensive support, ensuring your Type Approval applications are complete, accurate, and compliant with the latest regulations. From obtaining the necessary authorizations to submitting the correct IP Forms, we manage every step of the process efficiently. Partner with 360Compliance to streamline your SIRIM certification journey, minimize delays, and maximize compliance. Contact us today to ensure your products easily meet Malaysia's certification standards.
    India Regulatory Updates
    March 21, 2024
    India TEC issued a notification in January 2024 regarding generic exemptions for products without available test labs.  In January 2024, India's Telecommunications Engineering Centre (TEC) issued a significant notification regarding generic exemptions due to the absence of available test laboratories within the country. These exemptions represent a crucial development, indicating that specific parameters no longer require the submission of test reports if customers cannot provide them. It's important to note that while these exemptions are in place, ILAC reports for CE/FCC are still subject to regulations based on the specific product category. This means that evaluation criteria for these reports vary depending on the nature of the product. Furthermore, TEC has specified product categories that continue to accept ILAC reports. Notably, the validation for these exemptions has been extended until June 30, 2024, with the potential for further extensions based on the evolving circumstances. These updates underscore TEC's commitment to adapting regulations to facilitate market access while maintaining stringent quality standards in the telecommunications sector. TEC approves testing exemptions for several product categories under their mandatory testing and certification program The Telecommunications Engineering Centre (TEC), under the Ministry of Communications, recently issued a notification regarding the approval of test requirements exemptions for certain product categories that necessitate mandatory testing and certification. This development signifies a significant step towards streamlining regulatory processes and promoting efficiency in the telecommunications sector. By exempting certain products from rigorous testing requirements, TEC aims to facilitate faster market access for manufacturers while maintaining high standards of quality and safety. This initiative aims to reduce costs and accelerate the introduction of innovative products to benefit industry stakeholders and consumers. How 360Compliance Can Streamline TEC Certification? 360Compliance offers expert guidance for navigating TEC certification complexities, especially with recent updates. We're adept in TEC requirements and ILAC report evaluations, ensuring compliance. Our understanding of exemption criteria and certification process management aids manufacturers and distributors in adjusting smoothly. Partnering with us secures strategic advantages for quicker market access, keeping with India's telecom quality standards. We simplify compliance, focusing on your innovation and growth in a changing regulatory landscape.

    Get in touch to take the next step with 360Compliance

    Contact us