+972 545611767
Contact us
img
Regulatory Testing from Start to Certificate
img

    Welcome to 360 Compliance
    360

    Czech Republic amends requirements for RoHS

    May 4, 2020
    Sustainability

    The Ministry of Industry and Trade of the Czech Republic informs on another amendment of the Decree No. 481/2012 “On the restriction of the use of certain hazardous substances in electrical and electronic equipment”. The Regulation was issued to implement the provisions of the series of EU Directives with regards to the exemption from the restriction of the use of certain hazardous substances in electrical and electronic equipment.

    The national Regulation No. 344/2020 of the Czech Republic takes into consideration the following EU Directives:

    • Directive (EU) 2020/366 with regards to the exemption for use of lead as a thermal stabilizer in polyvinyl chloride used in certain in-vitro diagnostic medical devices for the analysis of blood and other body fluids and body gases

    • Directive (EU) 2020/360 with regards to the exemption for use of lead in platinized platinum electrodes used for certain conductivity measurements

    • Directive (EU) 2020/361 with regards to the exemption for use of hexavalent chromium as an anticorrosion agent of the carbon steel cooling system in absorption refrigerators

    • Directive (EU) 2020/365 with regard to the exemption for use of lead in solders and termination finishes used in certain hand-held combustion engines

    • Directive (EU) 2020/364 with regard to the exemption for the use of cadmium in certain radiation-tolerant video camera tubes

    According to the Government Decree No. 481/2012 Annexes II and III were amended with regards to the following substances:

    1. Annex II

    • Item 9: Hexavalent chromium as an anti-corrosion agent of the carbon steel cooling system in absorption refrigerators up to 0,75 % by weight in the cooling solution

    • Item 9 a I and a II: Hexavalent chromium up to 0,75% by weight, used as an anti-corrosion agent in the cooling solution of carbon steel cooling systems in absorption refrigerators

    • Item 41: Lead in solders and termination finishes of electrical and electronic components and finishes of printed circuit boards used in ignition modules and other electrical and electronic engine control systems, which for technical reasons must be mounted directly on or in the crankcase or cylinder of hand-held combustion engines

    2. Annex III

    • Item 37: Lead in platinized platinum electrodes used for conductivity measurements

    • Item 41: Lead as a thermal stabilizer in polyvinyl chloride (PVC) used as the base material in amperometric, potentiometric, and conductometric electrochemical sensors which are used in in-vitro diagnostic medical devices for the analysis of blood and other body fluids and body gases

    • Item 44: Cadmium in radiation-tolerant video camera tubes designed for cameras with a center resolution greater than 450 TV lines which are used in environments with ionizing radiation exposure exceeding 100 Gy/hour and a total dose in excess of 100kGy

    360Compliance provides Testing & Certification for type approval services and global market access in 195 countries. With proven expertise in worldwide regulations, 360Compliance can help your company shorten time to any market, minimize risks and manage the regulatory process from A-Z.

    Share this:

    You may also be interested

    Cambodia-TRC
    Cambodia TRC Regulatory Updates
    March 21, 2024
    On December 11th, 2023, the head leader of Cambodia's Telecommunication Regulator of Cambodia (TRC) issued a notification to all officers regarding the review of type approval documents, emphasizing the importance of consistency between the information provided in test reports and that submitted by clients. This notification clarified that previously accepted practices, such as using the product name and country of origin as claimed by the client, should now align precisely with the details presented in the test report. Following discussions and confirmations, TRC officers reaffirmed on December 27th, 2023, that this new rule must be adhered to for all future projects seeking type approval. For submissions with one country of origin, the test report must indicate the CoO. In cases where a product has more than one country of origin, the report should display one CoO, with any additional CoOs declared in a separate declaration letter. Moreover, TRC explicitly stated that reports lacking any indication of country of origin will not be accepted under these new guidelines. This adjustment aims to enhance accuracy and consistency in reviewing type approval submissions. Streamlining TRC Type Approval with Support from 360Compliance 360Compliance specializes in navigating TRC's type approval process, ensuring documents precisely reflect the country of origin per the latest guidelines. Our team offers expert advice and comprehensive services, including preparing test reports and submitting declaration letters. Partner with us to meet TRC's stringent criteria, minimize delays, and effectively secure type approval for your products. Let 360Compliance handle the complexities of compliance, allowing you to focus on your core business activities with peace of mind. Contact us today to learn more about our services and how we can help you achieve regulatory compliance in Cambodia.
    SIRIM_MCMC_Certification
    Malaysia SIRIM-MCMC Regulatory Updates
    March 21, 2024
    The Malaysia SIRIM CMCS Department, responsible for MCMC certification, recently implemented a significant update regarding Intellectual Property (IP) Forms for Type Approval applications. These forms replace the trademark authorization letter to improve efficiency and accuracy in approvals. The new IP Forms categorize trademark declarations based on whether the applicant has obtained authorization from the trademark/brand owner. For applicants who have been authorized, the required documents include evidence of a registration certificate issued by the Intellectual Property Corporation of Malaysia (MyIPO). Or an equivalent foreign organization, along with an Intellectual Property (IP) Authorization Letter (eTAC/FOR/01-8). On the other hand, if the applicant has not obtained written consent and authorization to use the trademark/brand, they must submit the Intellectual Property (IP) Undertaking form issued by the applicant (eTAC/FOR/01-9). Importantly, these new forms are effective immediately and will be used for all new projects. They mark a significant shift in SIRIM's approach. The organization can now accept brands/trademarks that have not been officially authorized by the brand owner. However, in such cases, the importer must provide a written declaration accepting responsibility. Furthermore, the new Brand name authorization process requires both the Brand owner and the Importer to co-sign the Brand name authorization letter. This updated procedure aims to enhance transparency and accountability in the approval process for Type Approval applications, ultimately benefiting both applicants and consumers in Malaysia. Simplifying SIRIM Certification with 360Compliance Navigating the latest SIRIM and MCMC certification requirements can be complex, especially when introducing new Intellectual Property (IP) Forms. 360Compliance is here to simplify this process for you. Our team knows the latest SIRIM updates, including the new eTAC/FOR/01-8 and eTAC/FOR/01-9 forms. We provide comprehensive support, ensuring your Type Approval applications are complete, accurate, and compliant with the latest regulations. From obtaining the necessary authorizations to submitting the correct IP Forms, we manage every step of the process efficiently. Partner with 360Compliance to streamline your SIRIM certification journey, minimize delays, and maximize compliance. Contact us today to ensure your products easily meet Malaysia's certification standards.
    India Regulatory Updates
    March 21, 2024
    India TEC issued a notification in January 2024 regarding generic exemptions for products without available test labs.  In January 2024, India's Telecommunications Engineering Centre (TEC) issued a significant notification regarding generic exemptions due to the absence of available test laboratories within the country. These exemptions represent a crucial development, indicating that specific parameters no longer require the submission of test reports if customers cannot provide them. It's important to note that while these exemptions are in place, ILAC reports for CE/FCC are still subject to regulations based on the specific product category. This means that evaluation criteria for these reports vary depending on the nature of the product. Furthermore, TEC has specified product categories that continue to accept ILAC reports. Notably, the validation for these exemptions has been extended until June 30, 2024, with the potential for further extensions based on the evolving circumstances. These updates underscore TEC's commitment to adapting regulations to facilitate market access while maintaining stringent quality standards in the telecommunications sector. TEC approves testing exemptions for several product categories under their mandatory testing and certification program The Telecommunications Engineering Centre (TEC), under the Ministry of Communications, recently issued a notification regarding the approval of test requirements exemptions for certain product categories that necessitate mandatory testing and certification. This development signifies a significant step towards streamlining regulatory processes and promoting efficiency in the telecommunications sector. By exempting certain products from rigorous testing requirements, TEC aims to facilitate faster market access for manufacturers while maintaining high standards of quality and safety. This initiative aims to reduce costs and accelerate the introduction of innovative products to benefit industry stakeholders and consumers. How 360Compliance Can Streamline TEC Certification? 360Compliance offers expert guidance for navigating TEC certification complexities, especially with recent updates. We're adept in TEC requirements and ILAC report evaluations, ensuring compliance. Our understanding of exemption criteria and certification process management aids manufacturers and distributors in adjusting smoothly. Partnering with us secures strategic advantages for quicker market access, keeping with India's telecom quality standards. We simplify compliance, focusing on your innovation and growth in a changing regulatory landscape.

    Get in touch to take the next step with 360Compliance

    Contact us